The latest Lead4Pass 300-630 dumps are fully updated, providing 76 exam questions and answers covering 300-630 DCACIA certification exam actual exam questions.
Candidates are welcome to download the Lead4Pass 300-630 dumps: https://www.leads4pass.com/300-630.html, and use PDF or VCE study tools to practice carefully to ensure a successful pass.
Read some latest Lead4Pass 300-630 dumps exam questions and answers online for 2023
| Number of exam questions | Exam name | Exam code | Last updated |
| 15 | Implementing Cisco Application Centric Infrastructure – Advanced (DCACIA) | 300-630 | 300-630 dumps |
Question 1:
Refer to the exhibit. What must be configured to allow the PBR node (LB-int) to monitor the availability of the endpoint that is in the EPG server?
A. Endpoint Dataplane Learning
B. Unicast Route disabled for client and server bridge domains
C. PBR node tracking
D. Direct Connect in the service graph template
Correct Answer: A
Question 2:
Refer to the exhibit. What must be configured in the service graph to redirect HTTP traffic between the EPG client and EPG server to go through the Cisco ASA firewall?
A. contract filter to allow ARP and HTTP
B. precise filter to allow only HTTP traffic
C. contract with no filter
D. permit-all contract filter
Correct Answer: A
Question 3:
What is the advantage of implementing an active-active firewall cluster that is stretched across separate pods when anycast services are configured?
A. A different MAC/IP combination can be configured for the firewall in each pod.
B. The local pod anycast node is preferred by the local spines.
C. A cluster can be deployed in transparent mode across pods.
D. Local traffic in a pod is load-balanced between the clustered firewalls.
Correct Answer: A
Question 4:
What is the purpose of the Forwarding Tag (FTAG) in Cisco ACI?
A. FTAG is used in Cisco ACI to add a label to the iVXLAN traffic in the fabric to apply the correct policy.
B. FTAG is used in Cisco ACI to add a label to the VXLAN traffic in the fabric to apply the correct policy.
C. FTAG trees in Cisco ACI are used to load balance unicast traffic.
D. FTAG trees in Cisco ACI are used to load balance multi-destination traffic.
Correct Answer: D
Question 5:
Refer to the exhibit. A network engineer configures a Layer 4 to Layer 7 device for an outside routed firewall that is connected to POD-1 inside a Cisco ACI fabric that consists of two pods. All traffic from POD-1 or POD-2 that uses the L3Out should pass through the routed firewall. Which Function Type must be implemented in the service graph for POD-2 to use L3Out?
A. GoThrough
B. L1
C. GoTo
D. L2
Correct Answer: D
Question 6:
Which action should be taken in Cisco ACI to reassign a unique globally scoped pcTag to an EPG that provides a global contract?
A. Configure subnets that are treated as virtual IP
B. Configure subnets that advertise externally
C. Configure subnets that are shared between VRFs
D. Configure subnets that are private to VRF
Correct Answer: C
Question 7:
Refer to the exhibit. Which configuration mode must be selected for the VMM vSwitch Port Channel policy to avoid MAC flapping on the Cisco UCS Fls and Cisco ACI leaf switches?
A. LACP Passive
B. MAC Pinning
C. LACP Active
D. Static Channel?Mode On
Correct Answer: B
Question 8:
DRAG DROP
Refer to the exhibit. Drag and drop the subnets and flags from the left into the External Network Instance Profile policies on the right to create a setup that advertises only 10.10.0.0/24 and 10.10.1.0/24 prefixes in VRF1 and establishes connectivity between VRFs. Not all options are used.
Select and Place:
Correct Answer:
Question 9:
Which firewall connection allows for the integration of service nodes in transparent mode with a Cisco ACI Multi-Pod setup?
A. active-standby mode across pods
B. active-active mode per pod for communication between internal endpoints
C. active-standby mode per pod for communication between endpoints and external networks
D. active-active mode across pods
Correct Answer: A
Reference: https://www.cisco.com/c/en/us/solutions/collateral/data-center-virtualization/application-centric-infrastructure/white-paper-c11-739571.html (table 1)
Question 10:
An existing Cisco ACI Multi-Site setup with default fabric settings contains endpoints that communicate with an MTU of 1500. What is the minimum MTU value that must be supported by the ISN to allow control plane endpoint information exchange between sites?
A. 9000
B. 1554
C. 9100
D. 1600
Correct Answer: C
Question 11:
Where are STP BPDUs flooded in Cisco ACI fabric?
A. in the bridge domain VLAN
B. in the native VLAN ID
C. in the access encapsulation VLAN part of different VLAN pools
D. in the VNID that is assigned to the FD VLAN
Correct Answer: A
Question 12:
Refer to the exhibit. Which combination of flags in the Cisco ACI contract allows a client in WebClient EPG to establish an HTTP connection toward a server in WebServer EPG?
A. Apply Both Direction ENABLED and Reverse Port Filter ENABLED
B. Apply Both Direction DISABLED and Reverse Port Filter DISABLED
C. Apply Both Direction DISABLED and Reverse Port Filter ENABLED
D. Apply Both Direction ENABLED and Reverse Port Filter DISABLED
Correct Answer: C
Question 13:
Refer to the exhibit. How is the ARP request from VM1 forwarded when VM2 is not learned in the Cisco ACI fabric?
A. Leaf 101 forwards the ARP request to one of the proxy VTEP spines.
B. POD1 spine responds to the ARP request after the POD1 COOP is updated with the VM2 location.
C. Leaf 101 encapsulates the ARP request into a multicast packet that is destined to 225.0.37.192.
D. Leaf 101 switch consumes the ARP reply of VM2 to update the local endpoint table.
Correct Answer: A
Question 14:
An engineer designs a Cisco ACI Multi-Pod solution that requires a pair of active-standby firewalls in different pods for external connectivity. How should the firewalls be implemented?
A. PBR for routed firewalls
B. separate L3Out peerings for routed firewalls
C. routed firewall for the default gateway
D. transparent firewalls
Correct Answer: D
Question 15:
Refer to the exhibit. Which two configuration steps are required in ISN for Cisco ACI Multi-Site setup? (Choose two.)
A. Connect Spine2 to ISN routers.
B. Configure BIDIR-PIM throughout the ISN
C. Increase ISN MTU to support the maximum MTU that is sent by endpoints
D. Configure OSPF between spines and ISN routers
E. Enable IGMPv3 on ISN routers
Correct Answer: DE
…
Hello 300-630 DCACIA exam candidates, hello 2023.
Welcome to download Lead4Pass 300-630 dumps: https://www.leads4pass.com/300-630.html, and use PDF or VCE study tools to practice carefully to ensure a successful pass.
