Lead4pass 300-425 dumps are fully updated in 2023, contain 120 latest exam questions and answers, and are valid exam material for the 300-425 ENWLSD certification exam.
Download Lead4pass 300-425 dumps: https://www.leads4pass.com/300-425.html, use PDF or VCE simulation engine to help you practice the test and ensure you successfully pass the 300-425 ENWLSD certification exam.
The 300-425 ENWLSD certification exam assesses candidates’ knowledge of wireless network design (Site surveys, Wired and wireless infrastructure, Mobility, WLAN high availability). The latest exam questions are randomly distributed in the exam room, so it is relatively difficult. Don’t worry! Use Lead4Pass 300-425 dumps to help you practice effectively and ensure your ultimate success.
Take the 300-425 Online Exam Practice
Participate in the 300-425 online practice test to learn more about your current strength and get more latest 300-425 dumps exam questions and answers.
| Type | Number of exam questions | Exam name | Exam code | Answers | Last updated |
| Free | 15 | Designing Cisco Enterprise Wireless Networks (ENWLSD) | 300-425 | View | 300-425 dumps |
Question 1:
How does AP failover priority for access points function when configured with priority 1 or 4?
A. When configured with priority 1, the access point is assigned with the highest priority level and it is marked as critical. This access point fails over other access points with a lower priority when there is a primary controller failure.
B. When configured with priority 4, the access point is assigned with the highest priority level and it is marked as critical. This access point fails over other access points with a lower priority when there is a primary controller failure.
C. When configured with priority 4, the access point is assigned with the lowest priority level and it is marked as low. This access point fails over after other access points with higher priority when there is a primary controller failure.
D. When configured with priority 1, the access point is assigned with the medium priority level and it is marked as a medium. This access point fails over after other access points with higher priority when there is a primary controller failure.
Question 2:
An engineer is designing an outdoor mesh network to cover several sports fields. The core of the network is located in a building at the entrance of a sports complex. Which type of antenna should be used with the RAP for backhaul connectivity?
A. 5 GHz. 8-dBi omnidirectional antenna
B. 2.4 GHz. 8-dBi patch antenna
C. 2.4 GHz. 14-dBi omnidirectional antenna
D. 5 GHz. 14-DBi patch antenna
Question 3:
A customer has noticed that Client Band Select is enabled and no clients are utilizing the 5 GHz bands. Which three parameters must be met to ensure that wireless clients use the 5 GHz bands? (Choose three.)
A. Ensure that channel bonding is enabled on the WLAN.
B. Ensure that the co-channel interference has not exceeded-85 dBm.
C. Ensure that the UNII-2 extended channels are enabled on the 802.11a radios.
D. Ensure that the client is receiving RSSI above the minimum band select RSSI threshold.
E. Ensure that the client is dual-band capable.
F. Ensure that the WLAN has 802.11a enabled.
Reference:
Question 4:
An engineer must create data link redundancy for the company\’s Cisco Wireless LAN controller. The engineer has decided to configure LAG-based redundancy instead of port-based redundancy. Which three features of LAG-based redundancy influenced this decision? (Choose three.)
A. Packets are always sent out on the same port they are received on.
B. All interface traffic passes as long as one port is up.
C. The same port has multiple untagged dynamic interfaces.
D. Interface connection to two separate nonstacked switches is available.
E. Full bandwidth of all links is available.
F. Ports are grouped into multiple LAGs.
Reference: https://community.cisco.com/t5/wireless-mobility-documents/lag-link-aggregation/ta-p/3128669
Question 5:
Refer to the exhibit.
An enterprise is using wireless as the main network connectivity for clients. To ensure service continuity. a pair of controllers will be installed in a data center. An engineer is designing SSO on the pair of controllers. What needs to be included in the design to avoid having the secondary controller go into maintenance mode?
A. The Keep alive timer is too low. which causes synchronization problems.
B. The connection between the redundancy ports is missing.
C. The redundancy port must be the same subnet as the redundancy mgmt.
D. The Global Configuration of SSO is set to Disabled on the controller.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/8-7/High_Availability_DG.html
Question 6:
Refer to the exhibit.
A client roams between two APs that are registered to two different controllers, where each controller has an interface in the client subnet. Both controllers are running AireOS. Which scenario explains the client roaming behavior?
A. Controllers exchange mobility control messages (over UDP port 16666) and the client database entry is moved from the original controller to the new controller.
B. Controllers do not exchange mobility control messages (over UDP port 16666) and the client database, entry is not moved from the original controller to the new controller.
C. Controllers exchange mobility control messages (over UDP port 16666) and a new client session is started with the new controller.
D. Controllers exchange mobility control messages (over UDP port 16666) and the client database entry is tunneled from the original controller to the new controller.
Reference:
Question 7:
An engineer Is trying to determine the most cost-effective way to deploy high availability for a campus enterprise wireless network that currently leverages three wireless LAN controllers. Which architecture should the engineer deploy?
A. N+1 solution without SS0
B. N+1 with SSO
C. N+N solution without SSO
D. N+N with SSO
Reference:
Question 8:
A network engineer is troubleshooting connectivity issues between two WLCs running 8.x code in SSO mode and finds that the redundancy management heartbeat is failing. Which packet type must be filtered for heartbeats when taking a capture to verify communication?
A. RSTP
B. UDP
C. TCP
D. ICMP
Question 9:
An enterprise is using a Cisco AireOS controller and Wi-Fi 6 APs. The controller is installed in the head office, and the employees primarily use Apple OS devices. The APs broadcast WLAN ENT-WLAN406558520-1 for the employees and a guest WLAN with similar naming. What needs to be enabled on the controller to optimize roaming?
A. Aggregated Probe Response Optimization
B. Fast SSID Changing
C. Load Balancing Window
D. Client Timers
Question 10:
A technician connects a Cisco Aironet 3700 Series access point to a switch and realizes that the AP is coming up with 3×3 MIMO. Which reason explains this behavior?
A. A redundant power supply is unavailable on the switch.
B. The switch is 802.3af capable.
C. The AP is getting power from a power injector.
D. The switch is PoE+ capable.
Reference:
Question 11:
A wireless network consultant must assess an existing wireless LAN controller. Which section must the consultant check before replacing the old APs with APs that are IEEE 802.11ac-capable?
A. number of AP licenses
B. controller PSU
C. throughput capacity
D. software version
Question 12:
APs in a remote office recently have been converted from local mode to FlexConnect to take advantage of the local switching. After the change, remote wireless users report voice quality issues and bad quality on wireless IP phones while roaming. A debug is performed, and it is noticed that the 802.11r Fast Transition is not working as expected, like on local mode AP, though the same WLAN configuration is in place. What is the cause of the issue regarding the FlexConnect APs?
A. They do not support 802.11r FT.
B. They must be added to AP groups along with a common RF profile.
C. They must be in a FlexConnect group to support 802.11r FT.
D. They must be added to AP groups to support fast roaming methods.
Reference: https://www.cisco.com/c/dam/en/us/td/docs/wireless/controller/technotes/80211r-ft/b-80211r-dg.html
Question 13:
A customer called with a requirement that internal clients must be on different subnets depending on the building they are in, AH access points are operating in local mode and will not be modified, and this is a single-controller solution. Which design approach creates the desired result?
A. Create an SSID, place it to the desired VLAN under WLANs, and configure 802 lx in ISE to assign the correct VLAN based on the SSID from which the client is authenticating.
B. Create FlexConnecI groups, place the access points in. and set the correct VLAN to SSID mapping based on location.
C. Create AP groups for each desired location, map the correct VLANs to the internal SSID and add the access points for that location.
D. Create mobility anchors for the SSID, and on the controller under the internal SSID. create a foreign map to the desired VLAN based on location.
Question 14:
A wireless engineer must optimize RF performance for multiple buildings with multiple types of construction and user density. Which two actions must be taken? (Choose two.)
A. Configure Flexconnect groups for each building.
B. Configure WMM profiles for each building.
C. Configure AP groups for each area type.
D. Configure RF profiles for each area type.
E. Enable DTPC on the network.
Question 15:
An engineer is conducting a Layer 2 site survey. Which type of client must the engineer match to the survey?
A. best client available
B. phone client
C. normal client
D. worst client available
…
Verify answer:
| Number | Q1 | Q2 | Q3 | Q4 | Q5 | Q6 | Q7 | Q8 | Q9 | Q10 | Q11 | Q12 | Q13 | Q14 | Q15 |
| Answers | B | D | DEF | ABE | B | A | B | B | B | B | D | C | C | CD | D |
Download the latest updated 300-425 dumps for 2023: https://www.leads4pass.com/300-425.html, get 120 valid 300-420 exam questions, provide the correct answers, and explain the puzzles.
Summarize:
We all know that Cisco certification exams are not easy, only hard work, and effective practice tests can help anyone to pass the exam successfully.
Lead4Pass provides the latest 300-425 dumps, including 120 latest exam questions and answers, to help all candidates practice the test and ensure 100% success in passing the exam.
