Prepare for Cisco 100-105 exam with best Cisco ICND1 100-105 dumps pdf files and vce youtube demo update free shared. The best and most updated latest Cisco ICND1 100-105 dumps exam training resources in PDF format free download from lead4pass. “Cisco Interconnecting Cisco Networking Devices Part 1 (ICND1 v3.0)” is the name of 100-105 ICND1 Cisco exam dumps which covers all the knowledge points of the real Cisco exam. High quality Cisco ICND1 100-105 dumps exam questions and answers download free try from lead4pass. 100% success and guarantee to pass Cisco 100-105 exam easily.
Vendor: Cisco
Certifications: ICND1
Exam Name: Cisco Interconnecting Cisco Networking Devices Part 1 (ICND1 v3.0)
Exam Code: 100-105
Total Questions: 347 Q&As
Google drive latest Cisco 100-105 dumps pdf files free download: https://drive.google.com/open?id=0B_7qiYkH83VReEJYRlhNVjdGeVU
Google drive latest Cisco 200-105 dumps pdf files free download: https://drive.google.com/open?id=0B_7qiYkH83VRS3BsT2duT3pTSlU
With the help of latest and authentic Cisco ICND1 100-105 dumps exam questions, you can find the best Cisco 100-105 exam preparation kit here from lead4pass and you will also get the 100% guarantee for passing the Cisco 100-105 exam.
New Cisco ICND1 100-105 Dumps Exam Real Questions And Answers (11-30)
QUESTION 11
Refer to the topology and switching table shown in the graphic.
Host B sends a frame to Host C. What will the switch do with the frame?
A. Drop the frame
B. Send the frame out all ports except port 0/2
C. Return the frame to Host B
D. Send an ARP request for Host C
E. Send an ICMP Host Unreachable message to Host B
F. Record the destination MAC address in the switching table and send the frame directly to Host C
Correct Answer: B
QUESTION 12
Two hosts are attached to a switch with the default configuration. Which statement about the configuration is true?
A. IP routing must be enabled to allow the two hosts to communicate.
B. The two hosts are in the same broadcast domain.
C. The switch must be configured with a VLAN to allow the two hosts to communicate.
D. Port security prevents the hosts from connecting to the switch.
Correct Answer: B
QUESTION 13
Refer to the exhibit.
Host A can communicate with Host B but not with Hosts C or D. How can the network administrator solve this problem?
A. Configure Hosts C and D with IP addresses in the 192.168.2.0 network.
B. Install a router and configure a route to route between VLANs 2 and 3.
C. Install a second switch and put Hosts C and D on that switch while Hosts A and B remain on the original switch.
D. Enable the VLAN trunking protocol on the switch.
Correct Answer: B
Explanation/Reference:
Two VLANs require a router in between otherwise they cannot communicate. Different VLANs and different IP subnets need a router to route between them.
QUESTION 14
Refer to the exhibit.
The network is converged.After link-state advertisements are received from Router_A, what information will Router_E contain in its routing table for the subnets 208.149.23.64 and 208.149.23.96?
A. 208.149.23.64[110/13] via 190.173.23.10, 00:00:07, FastEthemet0/0 208.149.23.96[110/13] via 190.173.23.10, 00:00:16, FastEthemet0/0
B. 208.149.23.64[110/1] via 190.172.23.10, 00:00:07, Serial1/0 208.149.23.96[110/3] via 190.173.23.10, 00:00:16, FastEthemet0/0
C. 208.149.23.64[110/13] via 190.173.23.10, 00:00:07, Serial1/0 208.149.23.96[110/13] via 190.173.23.10, 00:00:16, Serial1/0 208.149.23.96[110/13] via 190.173.23.10, 00:00:16, FastEthemet0/0
D. 208.149.23.64[110/3] via 190.172.23.10, 00:00:07, Serial1/0 208.149.23.96[110/3] via 190.173.23.10, 00:00:16, Serial1/0
Correct Answer: A
Explanation/Reference:
Router_E learns two subnets subnets 208.149.23.64 and 208.149.23.96 via Router_A through FastEthernet interface. 100-105 dumps
The interface cost is calculated with the formula 108 / Bandwidth. For FastEthernet i.
QUESTION 15
A router has learned three possible routes that could be used to reach a destination network. One route is from EIGRP and has a composite metric of 20514560. Another route is from OSPF with a metric of 782.
The last is from RIPv2 and has a metric of 4.
Which route or routes will the router install in the routing table?
A. the OSPF route
B. the EIGRP route
C. the RIPv2 route
D. all three routes
E. the OSPF and RIPv2 routes
Correct Answer: B
Explanation/Reference:
When one route is advertised by more than one routing protocol, the router will choose to use the routing protocol which has lowest Administrative Distance. The Administrative Distances of popular r.
QUESTION 16
Which three approaches can be used while migrating from an IPv4 addressing scheme to an IPv6 scheme? (Choose three)
A. static mapping of IPv4 address to IPv6 addresses
B. configuring IPv4 tunnels between IPv6 islands
C. use DHCPv6 to map IPv4 addresses to IPv6 addresses
D. use proxying and translation (NAT-PT) to translate IPv6 packets into IPv4 packets
E. configure IPv6 directly
F. enable dual-stack routing
Correct Answer: BDF
Explanation/Reference:
Connecting IPv6 islands with tunnels An IPv6 island is a network made of IPv6 links directly connected by IPv6 routers.
In the early days of IPv6 deployment, there are many IPv6 islands.
QUESTION 17
An administrator is in the process of changing the configuration of a router. What command will allow the administrator to check the changes that have been made prior to saving the new configuration?
A. Router# show startup-config
B. Router# show current-config
C. Router# show running-config
D. Router# show memory
E. Router# show flash
F. Router# show processes
Correct Answer: C
Explanation/Reference:
This command followed by the appropriate parameter will show the running config hence the admin will be able to see what changes have been made, and then they can be saved.
QUESTION 18
Which network device functions only at Layer 1 of the OSI model?
A. Option A
B. Option B
C. Option C
D. Option D
E. Option E
Correct Answer: B
Explanation/Reference:
Most hubs are amplifying the electrical signal; therefore, they are really repeaters with several ports. Hubs and repeaters are Layer 1 (physical layer) devices.
QUESTION 19
Refer to the exhibit.
A TFTP server has recently been installed in the Atlanta office. The network administrator is located in the NY office and has made a console connection to the NY router. After establishing the connection they are unable to backup the configuration file and IOS of the NY router to the TFTP server. What is the cause of this problem?
A. The NY router has an incorrect subnet mask.
B. The TFTP server has an incorrect IP address.
C. The TFTP server has an incorrect subnet mask.
D. The network administrator computer has an incorrect IP address.
Correct Answer: C
Explanation/Reference:
The TFTP server is using a mask of 255.255.255.240 (/28) while the router is configured with a /29. Because of this, 100-105 dumps the Atlanta router does not see the TFTP server as being in the same subnet.
QUESTION 20
Which of the following IP addresses are valid Class B host addresses if a default Class B mask is in use? (Choose two.)
A. 10.6.8.35
B. 133.6.5.4
C. 192.168.5.9
D. 127.0.0.1
E. 190.6.5.4
Correct Answer: BE
Explanation/Reference:
The IP addresses 133.6.5.4 and 190.6.5.4 are both valid Class B addresses when a default mask is in use. The Class B default mask is 255.255.0.0 and the range of valid addresses is 128.0.0.0- 191.2.
QUESTION 21
Drag the appropriate command on the left to the configuration task it accomplishes. (Not all options are used.)
Select and Place:
Correct Answer:
QUESTION 22
Refer to the exhibit.
After configuring two interfaces on the HQ router, the network administrator notices an error message. What must be done to fix this error?
A. The serial interface must be configured first.
B. The serial interface must use the address 192.168.1.2
C. The subnet mask of the serial interface should be changed to 255.255.255.0
D. The subnet mask of the FastEthernet interface should be changed to 255.255.255.240
E. The address of the FastEthernet interface should be changed to 192.168.1.66
Correct Answer: D
Explanation/Reference:
The IP address 192.168.1.17 255.255.255.0 specifies that the address is part of the 192.168.1.0/24 subnet 24 mask bits = 255.255.255.0 28 mask bits = 255.255.255.240 192.168.1.0/24 subnet has.
QUESTION 23
What is the default lease time for a DHCP binding?
A. 24 hours
B. 12 hours
C. 48 hours
D. 36 hours
Correct Answer: A
Explanation/Reference:
Explanation: By default, each IP address assigned by a DHCP Server comes with a one- day lease, which is the amount of time that the address is valid. To change the lease value for an IP address, us.
QUESTION 24
What is the default maximum number of equal-cost paths that can be placed into the routing table of a Cisco OSPF router?
A. 2
B. 8
C. 16
D. unlimited
Correct Answer: B
Explanation/Reference:
Maximum-paths (OSPF)
To control the maximum number of parallel routes that Open Shortest Path First (OSPF) can support, use the maximum-paths command.
Syntax Description
QUESTION 25
What does administrative distance refer to?
A. the cost of a link between two neighboring routers
B. the advertised cost to reach a network
C. the cost to reach a network that is administratively set
D. a measure of the trustworthiness of a routing information source
Correct Answer: D
Explanation/Reference:
Administrative distance is the feature that routers use in order to select the best path w.
QUESTION 26
Refer to the exhibit.
The enterprise has decided to use the network address 172.16.0.0. The network administrator needs to design a classful addressing scheme to accommodate the three subnets, with 30, 40, and 50 hosts, as shown. What subnet mask would accommodate this network?
A. 255.255.255.192
B. 255.255.255.224
C. 255.255.255.240
D. 255.255.255.248
E. 255.255.255.252
Correct Answer: A
Explanation/Reference:
Subnet mask A i.e. 255.255.255.192 with CIDR of /26 which means 64 hosts per subnet which are sufficient to accommodate even the largest subnet of 50 hosts.
QUESTION 27
100-105 dumps Which layer of the TCP/IP stack combines the OSI model physical and data link layers?
A. Internet layer
B. transport layer
C. application layer
D. network access layer
Correct Answer: D
Explanation/Reference:
The Internet Protocol Suite, TCP/IP, is a suite of protocols used for communication over the internet. The TCP/ IP model was created after the OSI 7 layer model for two major reasons.
QUESTION 28
Which value is indicated by the next hop in a routing table?
A. preference of the route source
B. IP address of the remote router for forwarding the packets
C. how the route was learned
D. exit interface IP address for forwarding the packets
Correct Answer: D
Explanation/Reference:
The routing table contains network/next hop associations. These associations tell a router that a particular destination can be optimally reached by sending the packet to a specific router that repr.
QUESTION 29
Which statement about routing protocols is true?
A. Link-state routing protocols choose a path by the number of hops to the destination.
B. OSPF is a link-state routing protocol.
C. Distance-vector routing protocols use the Shortest Path First algorithm.
D. IS-IS is a distance-vector routing protocol.
Correct Answer: B
QUESTION 30
What should be part of a comprehensive network security plan?
A. Allow users to develop their own approach to network security.
B. Physically secure network equipment from potential access by unauthorized individuals.
C. Encourage users to use personal information in their passwords to minimize the likelihood of passwords being forgotten.
D. Delay deployment of software patches and updates until their effect on end-user equipment is well known and widely reported.
E. Minimize network overhead by deactivating automatic antivirus client updates.
Correct Answer: B
Explanation/Reference:
From Cisco CCENT Exam Essentials study guide by Todd Lammle:
Know what the first part of a comprehensive network security plan is. The first part of your comprehensive network security plan i.
Why Select lead4pass?
Lead4pass is the best provider of IT learning materials and the right choice for you to pass the exam. Other brands started earlier, but the questions are not the newest the price is relatively expensive. Lead4pass provide the latest real and cheapest questions and answers, help you pass the exam easily at first try.
Helpful newest Cisco ICND1 100-105 dumps pdf practice materials and study guides free download from lead4pass. Useful Cisco ICND1 lead4pass 100-105 dumps exam is the industry leader in information technology, and getting certified by them is a guaranteed way to succeed with IT careers. Download Cisco ICND1 real 100-105 exam questions and verified answers. It is the best choice for you to pass Cisco ICND1 100-105 exam.
Best Cisco ICND1 100-105 dumps vce youtube demo:
https://youtu.be/trVHfqmuVvg
The Following Are Some Reviews From Our Customers:
You can click here to have a review about us: https://www.resellerratings.com/store/lead4pass
